Iscar
6003283
DGR 2002Z-6D IC908
Specifications
| Coating/Finish | TiAlN |
|---|---|
| Material | Carbide |
| Corner Radius (Inch) | 0.01 |
| Short Description | DGR-2002Z-6D-IC908 ISCAR INSERT |
| Long Description | A chipformer for use at low feeds. Recommended for Cr-Ni alloys and low carbon steel, especially in the bearing industry and on similar, problematic materials. The tight chipformer ensures short, deformed chips. |
| Cutting Direction | Right Hand |
| Unit Of Measure | Imperial |
| Maximum Groove Depth | 0.71 |
| Cutting Edge Angle | 6 degrees |
| Primary Workpiece Material | Stainless Steel, Hi Temp Steel, Hardened Metals, Cast Iron |
| Minimum Grooving Feed (Decimal) | 0.0012 |
| Maximum Grooving Feed (Decimal) | 0.0039 |
| Insert Designation | DGR |
| Insert Width (Decimal) | 0.08 |
| Insert Edge Length (Decimal) | 0.82 |
| Height (Decimal) | 0.39 |
| Width (Decimal) | 1.57 |
| Base Item Number | Parting Off Indexable Inserts |
| External/Internal | External |
| Product Type | Industrial Supplies |
| Unit of Measure | Imperial |
| Insert Width | 0.0790 |
| APP1Name | Parting |
| FamilyName | DGR-Z/ZS |
| COO | Israel |
| Work Material | Stainless Steel+Hi Temp+Steel+Hardened Metals+Cast Iron |
| Weight (OZ) | 0.14462 |
| Width (Inch) | 1.57 |
| Corner Radius | 0.0080 |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |