OSG
1410100201
M1.7x0.35 D3 2.5P NRT S/O
Specifications
| Coating/Finish | Steam Oxide |
|---|---|
| Thread Pitch/TPI | 0.35 |
| Chamfer Length | 0.03 |
| Overall Length (Metric) | 42 |
| Short Description | Forming Tap, For a Wide Range of Materials |
| Unit Of Measure | Metric |
| Tap Size | M1.7 |
| Tap Limit | 4 |
| Thread Length (Metric) | 9 |
| Blind Hole Add | 0.03 |
| Shank Diameter (Metric) | 3.58 |
| Full Thread | 0.39 |
| Item Sort (Metric) | 0.07 |
| Major Diameter (Metric) | 0.07 |
| Neck Length (Metric) | 10.7 |
| Pitch (Decimal) | 0.01 |
| Pitch (Metric) | 0.35 |
| Square Length (Metric) | 4.8 |
| Square Size (Metric) | 2.79 |
| 65% Thread Drill Size (Decimal) | 0.06 |
| 75% Thread Drill Size (Metric) | 1.56 |
| 75% Thread Drill Size (Decimal) | 0.06 |
| 75% Thread Drill Size (Metric) | 1.52 |
| Max. Drill Hole Size (Metric) | 1.56 |
| Min. Drill Hole Size (Metric) | 1.52 |
| Product Type | Industrial Supplies |
| Unit of Measure | Metric |
| Chamfer | 0.0345 |
| Shank Diameter | 3.58mm |
| Overall Length | 42mm |
| Thread Length | 9mm |
| Neck Length | 10.7mm |
| Chamfer (Decimal) | 0.0345 |
| Square Size | 2.79mm |
| Square Length | 4.8mm |