OSG
1410102801
M4x0.7 D4 4.5P NRT S/O
Specifications
| Coating/Finish | Steam Oxide |
|---|---|
| Thread Pitch/TPI | 0.7 |
| Chamfer Length | 0.12 |
| Overall Length (Metric) | 54 |
| Short Description | Forming Tap, For a Wide Range of Materials |
| Unit Of Measure | Metric |
| Tap Size | M4 |
| Tap Limit | 20 |
| Thread Length (Metric) | 8 |
| Blind Hole Add | 0.06 |
| Shank Diameter (Metric) | 4.26 |
| Full Thread | 0.63 |
| Item Sort (Metric) | 0.16 |
| Major Diameter (Metric) | 0.16 |
| Neck Length (Metric) | 19.1 |
| Pitch (Decimal) | 0.03 |
| Pitch (Metric) | 0.7 |
| Square Length (Metric) | 6.4 |
| Square Size (Metric) | 3.33 |
| 65% Thread Drill Size (Decimal) | 0.15 |
| 75% Thread Drill Size (Metric) | 3.71 |
| 75% Thread Drill Size (Decimal) | 0.14 |
| 75% Thread Drill Size (Metric) | 3.64 |
| Max. Drill Hole Size (Metric) | 3.71 |
| Min. Drill Hole Size (Metric) | 3.64 |
| Product Type | Industrial Supplies |
| Unit of Measure | Metric |
| Chamfer | 0.1242 |
| Shank Diameter | 4.26mm |
| Overall Length | 54mm |
| Thread Length | 8mm |
| Neck Length | 19.1mm |
| Chamfer (Decimal) | 0.1242 |
| Square Size | 3.33mm |
| Square Length | 6.4mm |