OSG
1410105301
M10x1.5 D10 4.5P NRT S/O
Specifications
| Coating/Finish | Steam Oxide |
|---|---|
| Thread Pitch/TPI | 1.5 |
| Chamfer Length | 0.27 |
| Overall Length (Metric) | 74 |
| Short Description | Forming Tap, For a Wide Range of Materials |
| Unit Of Measure | Metric |
| Tap Size | M10 |
| Tap Limit | 32 |
| Thread Length (Metric) | 18 |
| Blind Hole Add | 0.12 |
| Shank Diameter (Metric) | 9.67 |
| Full Thread | 0.99 |
| Item Sort (Metric) | 0.39 |
| Major Diameter (Metric) | 0.39 |
| Neck Length (Metric) | 31.8 |
| Pitch (Decimal) | 0.06 |
| Pitch (Metric) | 1.5 |
| Square Length (Metric) | 11 |
| Square Size (Metric) | 7.26 |
| 65% Thread Drill Size (Decimal) | 0.37 |
| 75% Thread Drill Size (Metric) | 9.39 |
| 75% Thread Drill Size (Decimal) | 0.36 |
| 75% Thread Drill Size (Metric) | 9.24 |
| Max. Drill Hole Size (Metric) | 9.39 |
| Min. Drill Hole Size (Metric) | 9.24 |
| Product Type | Industrial Supplies |
| Unit of Measure | Metric |
| Chamfer | 0.266 |
| Shank Diameter | 9.67mm |
| Overall Length | 74mm |
| Thread Length | 18mm |
| Neck Length | 31.8mm |
| Chamfer (Decimal) | 0.266 |
| Square Size | 7.26mm |
| Square Length | 11.0mm |