OSG
3097356
3 x R0.8 x 1.5 DEG x 60.8mm PHX-PC-DFR
Specifications
| Material | Carbide |
|---|---|
| Length Of Cut (Metric) | 4.5 |
| Overall Length (Metric) | 100 |
| Coating/Finish | WXS |
| Corner Radius (Metric) | 0.8 |
| Number Of Flutes | 3 |
| Unit Of Measure | Metric |
| Corner Radius | 0.80mm |
| Neck Diameter | 6 mm |
| Length Type | Pencil Neck |
| Short Description | Phoenix Deep Feed Radius End Mills |
| Diameter | 3 mm |
| Shank Size | 6 mm |
| Overall Length | 100 mm |
| Diameter (Decimal) | 0.12 |
| Shank Type | Shrink Fit |
| Series | 9580 |
| Neck Length | 60.80 mm |
| Length of Cut | 4.50 mm |
| Diameter (Metric) | 3 |
| Diameter Tolerance (Metric) | +0 / -0.015 |
| Effective Draft Angle | 1.50 degrees |
| End Mill Total Depth | 0.18 |
| Neck Draft Angle | 1.50 degrees |
| Radius Tolerance (Metric) | +0.03 / -0.03 |
| End Type | Center Cutting |
| Length Style | Pencil Neck |
| Shank Style | Shrink Fit |
| Min. Neck Diameter (Metric) | 2.9 |
| Product Type | Industrial Supplies |
| Unit of Measure | Metric |
| Shank Diameter | 6.00mm |
| Minimum Neck Diameter | 2.90mm |
| Diameter Tolerance | +0 / -0.015mm |
| End Style | Corner Radius |
| Maximum Neck Diameter | 6.00mm |
| Diameter (Inch) | 0.1181 |