Sandvik Coromant
5744213
Sandvik Coromant 5744213
Specifications
| Material | Cermet |
|---|---|
| Coating/Finish | Uncoated |
| Thickness (Metric) | 3.97 |
| Thickness (Inch) | 0.16 |
| Short Description | CoroMill® 290 insert for milling |
| Shape | Square |
| Style | R290 |
| Unit Of Measure | Metric |
| Country of Origin | Japan |
| Series | CoroMill 290 |
| Size | 12T3 |
| Grade | 530 |
| Inscribed Circle Diameter | 13.29 mm |
| Thickness | 3.97 mm |
| Chip Breaker Type | PL |
| Length (Decimal) | 0.25 |
| Inscribed Circle Diameter (Decimal) | 0.52 |
| Inscribed Circle Diameter (Metric) | 13.29 |
| ANSI Code | R290-12T308E-PL 530 |
| ISO Code | R290-12T308E-PL 530 |
| Hand of Insert | Right |
| Coner Radius (Inch) | 0.03 |
| Coner Radius (Metric) | 0.8 |
| Fixing Hole Diameter (Decimal) | 0.16 |
| Fixing Hole Diameter (Metric) | 4.1 |
| Coating Process Type | Uncoat |
| Operation Type | Light |
| Mounting Style | Screw/Clamp |
| Wiper Edge Length (Decimal) | 0.06 |
| Wiper Edge Length (Metric) | 1.46 |
| Major Cutting Edge Angle | 90 degrees |
| Substrate Type | Cermet |
| Number of Cutting Edges | 4 |
| Application | Milling, General |
| ISO Material Classification | PMNH |
| Base Item Number | 1002 |
| Insert Size | 12T3 |
| Length | 6.4 mm |
| Max. Depth Of Cut (Decimal) | 0.24 |
| Max. Depth Of Cut (Metric) | 6 |
| Maximum Depth Of Cut (Inch) | 0.24 |
| Maximum Depth Of Cut (Metric) | 6 |
| Product Type | Industrial Supplies |
| Unit of Measure | Metric |
| Weight | 0.008 LB |
| Height Packed Product Metric | 11 mm |
| Insert Style | R290 |
| Height Packed Product Imperial | 0.433 inch |
| ISO Code (packed) | R290-12T308E-PL530 |
| Length Packed Product Metric | 95 mm |
| Life Cycle State | 30 |
| ISO Code (unpacked) | R290-12T308E-PL 530 |
| Length Packed Product Imperial | 3.74 inch |