Sandvik Coromant
6660381
Sandvik Coromant 6660381
Specifications
| Cutting Diameter (Metric) | 82 |
|---|---|
| Shank Diameter (Metric) | 80 |
| Series | CoroDrill 880 |
| Cutting Diameter (Inch) | 3.23 |
| Shank Diameter (Inch) | 3.15 |
| Depth x Diameter Ratio | 3 x D |
| Short Description | CoroDrill® 880 indexable insert drill |
| Unit Of Measure | Metric |
| Cutting Diameter | 82 mm |
| Shank Diameter | 80 mm |
| Coolant Through | Yes |
| ANSI Code | 880-D0820V80-03 |
| Overall Length (Decimal) | 13.78 |
| Overall Length (Metric) | 350 |
| Functional Length (Decimal) | 13.01 |
| Point Length (Decimal) | 0.06 |
| Point Length (Metric) | 1.5 |
| Functional Length (Metric) | 330.5 |
| Body Length (Decimal) | 11.32 |
| Body Length (Metric) | 287.61 |
| Usable Length (Decimal) | 9.92 |
| Usable Length (Metric) | 252 |
| Cutting Edge Angle | 88 degrees |
| Clamping Type Code | Screw/Clamp |
| Achievable Hole Tolerance Lower (Decimal) | -0.011811 |
| Achievable Hole Tolerance Lower (Metric) | -0.3 |
| Achievable Hole Tolerance Upper (Decimal) | 0.01 |
| Achievable Hole Tolerance Upper (Metric) | 0.3 |
| Usable Length Diameter Ratio | 3.073 |
| Coolant Pressure | 145.038 lbf/in2 |
| Coolant Entry Style Code | 1: Axial Concentric Entry |
| Country of Origin | Netherlands |
| Base Item Number | 2013 |
| Body Length (Inch) | 11.32 |
| Max. Rotational Speed | 5000 1/min |
| Product Type | Industrial Supplies |
| Unit of Measure | Metric |
| Weight | 27.999 LB |
| Height Packed Product Metric | 185 mm |
| Height Packed Product Imperial | 7.283 inch |
| ISO Code (packed) | 880-D0820V80-03 |
| Length Packed Product Metric | 410 mm |
| Life Cycle State | 20 |
| ISO Code (unpacked) | 880-D0820V80-03 |
| Length Packed Product Imperial | 16.142 inch |