Sandvik Coromant
7790792
Sandvik Coromant 7790792
Specifications
| Cutting Diameter (Metric) | 45 |
|---|---|
| Shank Diameter (Metric) | 50 |
| Series | CoroDrill DS20 |
| Cutting Diameter (Inch) | 1.77 |
| Shank Diameter (Inch) | 1.97 |
| Depth x Diameter Ratio | 7 x D |
| Short Description | corodrill® ds20 indexable insert drill |
| Unit Of Measure | Metric |
| Cutting Diameter | 45 mm |
| Shank Diameter | 50 mm |
| Coolant Through | Yes |
| ANSI Code | DS20-D4500DM50-07 |
| Overall Length (Decimal) | 15.16 |
| Overall Length (Metric) | 385 |
| Functional Length (Decimal) | 14.4 |
| Point Length (Decimal) | 0.05 |
| Point Length (Metric) | 1.28 |
| Functional Length (Metric) | 365.72 |
| Body Length (Decimal) | 12.60 |
| Body Length (Metric) | 320 |
| Usable Length (Decimal) | 12.45 |
| Usable Length (Metric) | 316.28 |
| Cutting Edge Angle | 81 degrees |
| Clamping Type Code | Screw/Clamp |
| Achievable Hole Tolerance Lower (Decimal) | -0.003937 |
| Achievable Hole Tolerance Lower (Metric) | -0.1 |
| Achievable Hole Tolerance Upper (Decimal) | 0.02 |
| Achievable Hole Tolerance Upper (Metric) | 0.5 |
| Usable Length Diameter Ratio | 7.028 |
| Torque | 3 Nm |
| Coolant Pressure | 145.038 lbf/in2 |
| Coolant Entry Style Code | 4: Axial Concentric Entry On Circle |
| Country of Origin | Sweden |
| Base Item Number | 2108 |
| Body Length (Inch) | 12.6 |
| Max. Adjustment Limit (Decimal) | 0.1 |
| Max. Adjustment Limit (Metric) | 2.65 |
| Max. Rotational Speed | 2000 1/min |
| Product Type | Industrial Supplies |
| Unit of Measure | Metric |
| Weight | 6.574 LB |