Sandvik Coromant
7790847
Sandvik Coromant 7790847
Specifications
| Cutting Diameter (Metric) | 57.15 |
|---|---|
| Shank Diameter (Metric) | 50 |
| Series | CoroDrill DS20 |
| Cutting Diameter (Inch) | 2.25 |
| Shank Diameter (Inch) | 1.97 |
| Depth x Diameter Ratio | 4 x D |
| Short Description | CoroDrill® DS20 indexable insert drill |
| Unit Of Measure | Imperial |
| Cutting Diameter | 2.25 Inch |
| Shank Diameter | 1.97 Inch |
| Coolant Through | Yes |
| ANSI Code | DS20-D5715DM50-04 |
| Overall Length (Decimal) | 11.67 |
| Overall Length (Metric) | 296.36 |
| Functional Length (Decimal) | 10.9 |
| Point Length (Decimal) | 0.06 |
| Point Length (Metric) | 1.59 |
| Functional Length (Metric) | 276.77 |
| Body Length (Decimal) | 9.18 |
| Body Length (Metric) | 233.12 |
| Usable Length (Decimal) | 9.06 |
| Usable Length (Metric) | 230.19 |
| Cutting Edge Angle | 81 degrees |
| Clamping Type Code | Screw/Clamp |
| Achievable Hole Tolerance Upper (Decimal) | 0.01 |
| Achievable Hole Tolerance Upper (Metric) | 0.35 |
| Usable Length Diameter Ratio | 4.028 |
| Torque | 3 Nm |
| Coolant Pressure | 145.038 lbf/in2 |
| Coolant Entry Style Code | 4: Axial Concentric Entry On Circle |
| Country of Origin | Sweden |
| Base Item Number | 2108 |
| Body Length (Inch) | 9.18 |
| Max. Adjustment Limit (Decimal) | 0.12 |
| Max. Adjustment Limit (Metric) | 3.01 |
| Max. Rotational Speed | 6000 1/min |
| Product Type | Industrial Supplies |
| Unit of Measure | Imperial |
| Weight | 7.242 LB |