Seco Tools
02479646
40060-RS
Specifications
| Length Of Cut (Inch) | 8 |
|---|---|
| Helix Angle | 25 degrees |
| Material | Solid Carbide |
| Shank Diameter (Metric) | 5.8 |
| Cutting Diameter (Metric) | 6 |
| Type | Corner Radius |
| Overall Length (Metric) | 65 |
| Coating/Finish | Uncoated |
| Corner Radius (Metric) | 0.1 |
| Number Of Flutes | 2 |
| Peripheral Effective Cutting Edge Count | 2 |
| Rake Angle Axial | 25 degrees |
| Short Description | Solid Milling |
| Shank Type | Cylindrical |
| Long Description | Seco 40060-RS Solid Milling H.P.for Aluminum, Corner Radius End Mill |
| Direction Of Hand | Right |
| Coolant Through | No |
| ANSI Code | 40060-RS |
| Applicable Materials | Aluminum |
| Direction of Flute | Right |
| Cutting Edge Count | 2 |
| Center Cutting Capability | Yes |
| Connection Diameter Machine Side (Metric) | 5.80 |
| Theoretical Cutting Edge Length (Metric) | 8 |
| Runout Axial (Metric) | 0.01 |
| Runout Radial (Metric) | 0.01 |
| Lower Cutting Diameter Tolerance (Metric) | -0.04 |
| Upper Cutting Diameter Tolerance (Metric) | -0.02 |
| Rake Angle Radial | 20 degrees |
| Tool Cutting Edge Angle | 90 degrees |
| Tool Cutting Edge Angle In Feed Direction End | 92.5 degrees |
| Tool Cutting Edge Angle In Feed Direction Side | 90 degrees |
| Peripheral Edges In The Tool | 2 |
| Face Cutting Edge Count | 2 |
| Pheripheral Cutting Edge Count | 2 |
| Cutting Geometry Type | JH40 |
| Cutting Geometry Type Technical | JH40 |
| Rake Angle Orthogonal | 0 degrees |
| Max. Depth Of Cut | 8 mm |
| Max. Depth Of Cut In Feed Direction End (Metric) | 1.20 |
| Max. Depth Of Cut In Feed Direction Side (Metric) | 8 |
| Max. Helical Interpolation Hole Diameter (Metric) | 11.79 |
| Maximum Ramping Angle | 45 degrees |
| Min. Clamping Length (Metric) | 36 |
| Min. Helical Interpolation Hole Diameter (Metric) | 7.80 |
| Weight | 0.046 |
| Hand (Cutting Direction) | RIGHT |
| Item Weight (lbs) | 0.046 |