No image available
Seco Tools
02810504
JCO710320D2R100.3Z6
Specifications
| Length Of Cut (Inch) | 53 |
|---|---|
| Helix Angle | 35 degrees |
| Material | HSS-Cobalt |
| Shank Diameter (Metric) | 32 |
| Cutting Diameter (Metric) | 32 |
| Type | Corner Radius |
| Overall Length (Metric) | 132 |
| Coating/Finish | Uncoated |
| Corner Radius (Metric) | 1 |
| Number Of Flutes | 6 |
| Peripheral Effective Cutting Edge Count | 6 |
| Rake Angle Axial | 35 degrees |
| Short Description | Solid Milling |
| Shank Type | Weldon |
| Series | JABRO |
| Long Description | Seco JCO710320D2R100.3Z6 Solid Milling HSS-Co H.P.for Ti Corner Radius End Mill |
| Direction Of Hand | Right |
| Coolant Through | No |
| ANSI Code | JCO710320D2R100.3Z6 |
| Applicable Materials | Titanium |
| Direction of Flute | Right |
| Cutting Edge Count | 6 |
| Center Cutting Capability | No |
| Connection Diameter Machine Side (Metric) | 32 |
| Theoretical Cutting Edge Length (Metric) | 53 |
| Runout Axial (Metric) | 0.03 |
| Runout Radial (Metric) | 0.03 |
| Upper Cutting Diameter Tolerance (Metric) | 0.10 |
| Rake Angle Radial | 12 degrees |
| Tool Cutting Edge Angle | 90 degrees |
| Tool Cutting Edge Angle In Feed Direction End | 91 degrees |
| Tool Cutting Edge Angle In Feed Direction Side | 90 degrees |
| Peripheral Edges In The Tool | 6 |
| Face Cutting Edge Count | 6 |
| Pheripheral Cutting Edge Count | 6 |
| Cutting Geometry Type | JCO710 |
| Cutting Geometry Type Technical | JCO710 |
| Max. Depth Of Cut | 53 mm |
| Max. Depth Of Cut In Feed Direction End (Metric) | 6.40 |
| Max. Depth Of Cut In Feed Direction Side (Metric) | 53 |
| Max. Helical Interpolation Hole Diameter (Metric) | 61.90 |
| Maximum Depth Of Cut (Metric) | 53 mm |
| Min. Clamping Length (Metric) | 60 |
| Min. Helical Interpolation Hole Diameter (Metric) | 41.60 |
| Weight | 1.509 |