Seco Tools
10053123
JSE513040F2C.3Z3
Specifications
| Helix Angle | 35 degrees |
|---|---|
| Material | Solid Carbide |
| Shank Diameter (Metric) | 6 |
| Cutting Diameter (Metric) | 4 |
| Type | Corner Chamfer |
| Length Of Cut (Metric) | 8 |
| Overall Length (Metric) | 57 |
| Coating/Finish | SIRON-A |
| Number Of Flutes | 3 |
| Unit Of Measure | Metric |
| Peripheral Effective Cutting Edge Count | 3 |
| Rake Angle Axial | 5 degrees |
| Corner Chamfer Width (Metric) | 0.04 |
| Short Description | Solid Milling |
| Shank Type | Weldon |
| Series | JABRO -TORNADO |
| Long Description | Seco JSE513040F2C.3Z3 Solid Milling G.P. Universal Corner Chamfer End Mill |
| Direction Of Hand | Right |
| Grade | SIRA |
| Coolant Through | No |
| Neck Length (Metric) | 12 |
| ANSI Code | JSE513040F2C.3Z3 |
| Corner Chamfer Angle | 45 degrees |
| Direction of Flute | Right |
| Cutting Edge Count | 3 |
| Center Cutting Capability | Yes |
| Connection Diameter Machine Side (Metric) | 6 |
| Theoretical Cutting Edge Length (Metric) | 8 |
| Runout Axial (Metric) | 0.01 |
| Runout Radial (Metric) | 0.02 |
| Neck Length 1 (Metric) | 12 |
| Corner Chamfer Width Upper Tolerance (Metric) | 0.02 |
| Lower Cutting Diameter Tolerance (Metric) | -0.04 |
| Upper Cutting Diameter Tolerance (Metric) | -0.02 |
| Rake Angle Radial | 10 degrees |
| Tool Cutting Edge Angle | 90 degrees |
| Tool Cutting Edge Angle In Feed Direction End | 93 degrees |
| Tool Cutting Edge Angle In Feed Direction Side | 90 degrees |
| Cutting Diameter Tolerance Class | e8 |
| Peripheral Edges In The Tool | 3 |
| Face Cutting Edge Count | 3 |
| Pheripheral Cutting Edge Count | 3 |
| Face Effective Cutting Edge Count | 3 |
| Cutting Geometry Type | JSE513 |
| Cutting Geometry Type Technical | JSE513 |
| Base Item Number | 514 - General Purpose - Square - Univer,Metric |
| Max. Depth Of Cut | 8 mm |
| Max. Depth Of Cut In Feed Direction End (Metric) | 0.8 |
| Max. Depth Of Cut In Feed Direction Side (Metric) | 8 |
| Max. Helical Interpolation Hole Diameter (Metric) | 7.92 |
| Maximum Ramping Angle | 5 degrees |
| Min. Clamping Length (Metric) | 36 |
| Min. Helical Interpolation Hole Diameter (Metric) | 5.2 |
| Product Type | Industrial Supplies |
| Unit of Measure | Metric |
| Weight | 0.044 |
| Hand (Cutting Direction) | Right |
| Item Weight (lbs) | 0.044 |