Seco Tools
19208
150080-MEGA-64
Specifications
| Coating/Finish | MEGA-64 |
|---|---|
| Shank Type | Cylindrical |
| Overall Length (Metric) | 85 |
| Material | Solid Carbide |
| Length Of Cut (Metric) | 8 |
| Number Of Flutes | 4 |
| Unit Of Measure | Metric |
| Corner Radius (Metric) | 4 |
| Flute Helix Angle | 17 degrees |
| Peripheral Effective Cutting Edge Count | 4 |
| Rake Angle Axial | 17 degrees |
| Short Description | Solid Milling |
| Shank Diameter | 8 mm |
| Long Description | Seco 150080-MEGA-64 Solid Milling HSM - Hardened Steel, Ballnose End Mill |
| Series | JABRO |
| Coolant Through | No |
| ANSI Code | 150080-MEGA-64 |
| Lower Cutting Diameter Tolerance (Metric) | -0.04 |
| Cutting Edge Count | 4 |
| Cutting Diameter | 8 mm |
| Applicable Materials | Hardened Steel |
| Direction Of Hand | Right |
| Direction of Flute | Right |
| Profile Radius (Metric) | 3.98 |
| Center Cutting Capability | Yes |
| Connection Diameter Machine Side (Metric) | 8 |
| Theoretical Cutting Edge Length (Metric) | 8 |
| Runout Radial (Metric) | 0.01 |
| Upper Cutting Diameter Tolerance (Metric) | -0.02 |
| Rake Angle Orthogonal | 0 degrees |
| Tool Cutting Edge Angle | 90 degrees |
| Tool Cutting Edge Angle In Feed Direction Side | 90 degrees |
| Peripheral Edges In The Tool | 4 |
| Face Cutting Edge Count | 4 |
| Pheripheral Cutting Edge Count | 4 |
| Cutting Geometry Type | JH150 |
| Cutting Geometry Type Technical | JH150 |
| Base Item Number | JH160-High Speed-Ballnose-Hardened Ste,M |
| Max. Depth Of Cut | 8 mm |
| Max. Depth Of Cut In Feed Direction End (Metric) | 1.6 |
| Max. Depth Of Cut In Feed Direction Side (Metric) | 8 |
| Max. Helical Interpolation Hole Diameter (Metric) | 14.4 |
| Min. Clamping Length (Metric) | 36 |
| Min. Helical Interpolation Hole Diameter (Metric) | 10.4 |
| Product Type | Industrial Supplies |
| Unit of Measure | Metric |
| Weight | 0.128 LB |