Seco Tools
19476
120050-MEGA-64
Specifications
| Length Of Cut (Inch) | 6 |
|---|---|
| Helix Angle | 20 degrees |
| Material | Solid Carbide |
| Shank Diameter (Metric) | 6 |
| Cutting Diameter (Metric) | 5 |
| Overall Length (Metric) | 50 |
| Coating/Finish | MEGA-64 |
| Corner Radius (Metric) | 0.5 |
| Number Of Flutes | 4 |
| Unit Of Measure | Metric |
| Peripheral Effective Cutting Edge Count | 4 |
| Rake Angle Axial | 20 degrees |
| Short Description | Solid Milling |
| Shank Type | Cylindrical |
| Series | JABRO |
| Long Description | Seco 120050-MEGA-64 Solid Milling HSM -Hardened Steel, Corner Rad End Mill |
| Direction Of Hand | Right |
| Coolant Through | No |
| Neck Length (Metric) | 12 |
| ANSI Code | 120050-MEGA-64 |
| Applicable Materials | Hardened Steel |
| Direction of Flute | Right |
| Cutting Edge Count | 4 |
| Center Cutting Capability | No |
| Connection Diameter Machine Side (Metric) | 6 |
| Theoretical Cutting Edge Length (Metric) | 6 |
| Runout Axial (Metric) | 0.01 |
| Runout Radial (Metric) | 0.01 |
| Neck Length 1 (Metric) | 12 |
| Lower Cutting Diameter Tolerance (Metric) | -0.03 |
| Upper Cutting Diameter Tolerance (Metric) | -0.02 |
| Rake Angle Radial | 2 degrees |
| Tool Cutting Edge Angle | 90 degrees |
| Tool Cutting Edge Angle In Feed Direction End | 97 degrees |
| Tool Cutting Edge Angle In Feed Direction Side | 90 degrees |
| Collosion Angle | 2.5 degrees |
| Peripheral Edges In The Tool | 4 |
| Face Cutting Edge Count | 4 |
| Pheripheral Cutting Edge Count | 4 |
| Cutting Geometry Type | JH120 |
| Cutting Geometry Type Technical | JH120 |
| Base Item Number | JH120-High Speed-Square-Hardened Steel-4-6,M |
| Max. Depth Of Cut | 6 mm |
| Max. Depth Of Cut In Feed Direction End (Metric) | 1 |
| Max. Depth Of Cut In Feed Direction Side (Metric) | 6 |
| Max. Helical Interpolation Hole Diameter (Metric) | 8.95 |
| Max. Working Depth 0.5 Degree (Metric) | 13 |
| Max. Working Depth 0 Degree (Metric) | 12 |
| Max. Working Depth 1.5 Degree (Metric) | 13.7 |
| Max. Working Depth 1 Degree (Metric) | 13.4 |
| Max. Working Depth 2 Degrees (Metric) | 14.1 |
| Max. Working Depth 3 Degrees (Metric) | 14.9 |
| Maximum Ramping Angle | 1 degrees |
| Min. Clamping Length (Metric) | 36 |
| Min. Helical Interpolation Hole Diameter (Metric) | 6.5 |
| Product Type | Industrial Supplies |
| Unit of Measure | Metric |
| Weight | 0.042 LB |