Seco Tools
23785
MM16-0.630-R080-PL-MD07
Specifications
| Material | Carbide |
|---|---|
| Corner Radius (Metric) | 2 |
| Coating/Finish | Coated |
| Type | Exchangeable, Plunging |
| Short Description | Exchangeable Head Mill Insert |
| Unit Of Measure | Metric |
| Series | Minimaster |
| Grade | F30M |
| Chip Breaker Type | MD07 |
| ANSI Code | MM16-0.630-R080-PL-MD07 |
| Number of Cutting Edges | 1 |
| Cutting Diameter | 16 mm |
| Number of Peripheral Edges | 2 |
| Number of Cutting Edges (Peripheral Effective) | 2 |
| Functional Length (Metric) | 11.3 |
| Torque | 16 Nm |
| Applicable Material | Wear Resistant-Steel |
| Tool Cutting Edge Angle | 90 degrees |
| Tool Cutting Edge Angle In Feed Direction End | 90 degrees |
| Tool Cutting Edge Angle In Feed Direction Side | 90 degrees |
| Rake Angle Axial | 6 deg |
| Relief Angle | 5 degrees |
| Base Item Number | Minimaster - Plunging,Metric |
| Max. Depth Of Cut | 8 mm |
| Max. Depth Of Cut In Feed Direction End (Metric) | 8 |
| Max. Depth Of Cut In Feed Direction Side (Metric) | 8 |
| Max. Helical Interpolation Hole Diameter (Metric) | 30 |
| Max. Plunge Depth (Metric) | 11.3 |
| Min. Helical Interpolation Hole Diameter (Metric) | 17.3 |
| Product Type | Industrial Supplies |
| Unit of Measure | Metric |
| Weight | 0.094 LB |