Seco Tools
2425001
MM10-10.50-HF-MD08
Specifications
| Material | Carbide |
|---|---|
| Corner Radius (Metric) | 0.8 |
| Corner Radius (Inch) | 0.03 |
| Coating/Finish | Coated |
| Type | Exchangeable, High Feed |
| Short Description | Exchangeable Head Mill Insert |
| Unit Of Measure | Metric |
| Series | Minimaster |
| Grade | F30M |
| Chip Breaker Type | MD08 |
| ANSI Code | MM10-10.50-HF-MD08 |
| Number of Cutting Edges | 1 |
| Cutting Diameter | 5 mm |
| Cutting Diameter (Decimal) | 0.2 |
| Number of Peripheral Edges | 2 |
| Number of Cutting Edges (Peripheral Effective) | 2 |
| Functional Length (Metric) | 8.5 |
| Functional Length (Decimal) | 0.34 |
| Curved Cutting Edge Radius (Metric) | 5 |
| Curved Cutting Edge Radius (Decimal) | 0.2 |
| Programming Radius (Metric) | 1.13 |
| Programming Radius (Decimal) | 0.05 |
| Torque | 12 Nm |
| Applicable Material | Wear Resistant-Steel |
| Tool Cutting Edge Angle In Feed Direction Side | 90 degrees |
| Base Item Number | Minimaster - High Feed,Both |
| Max. Cutting Diameter (Decimal) | 0.39 |
| Max. Cutting Diameter (Metric) | 10 |
| Max. Depth Of Cut | 0.44 mm |
| Max. Depth Of Cut (Decimal) | 0.02 |
| Max. Depth Of Cut In Feed Direction End (Decimal) | 0.16 |
| Max. Depth Of Cut In Feed Direction End (Metric) | 4 |
| Max. Depth Of Cut In Feed Direction Side (Decimal) | 0.02 |
| Max. Depth Of Cut In Feed Direction Side (Metric) | 0.44 |
| Max. Helical Interpolation Hole Diameter (Decimal) | 0.72 |
| Max. Helical Interpolation Hole Diameter (Metric) | 18.2 |
| Maximum Depth Of Cut (Inch) | 0.02 |
| Maximum Ramping Angle | 5 degrees |
| Min. Helical Interpolation Hole Diameter (Decimal) | 0.48 |
| Min. Helical Interpolation Hole Diameter (Metric) | 12.2 |
| Product Type | Industrial Supplies |
| Unit of Measure | Metric |
| Weight | 0.023 LB |