Seco Tools
2462686
170030.0-MEGA-64
Specifications
| Helix Angle | 50 degrees |
|---|---|
| Material | Solid Carbide |
| Shank Diameter (Metric) | 6 |
| Cutting Diameter (Metric) | 3 |
| Type | Corner Chamfer |
| Length Of Cut (Metric) | 3 |
| Overall Length (Metric) | 50 |
| Coating/Finish | MEGA-64 |
| Number Of Flutes | 3 |
| Unit Of Measure | Metric |
| Peripheral Effective Cutting Edge Count | 3 |
| Rake Angle Axial | 50 degrees |
| Corner Chamfer Width (Metric) | 0.08 |
| Short Description | Solid Milling |
| Shank Type | Cylindrical |
| Series | JABRO |
| Long Description | Seco 170030.0-MEGA-64 Solid Milling HPM -Hard Steel, Corner Chamfer End Mill |
| Direction Of Hand | Right |
| Coolant Through | No |
| Neck Length (Metric) | 6 |
| ANSI Code | 170030.0-MEGA-64 |
| Corner Chamfer Angle | 45 degrees |
| Applicable Materials | Hardened Steel |
| Direction of Flute | Right |
| Cutting Edge Count | 3 |
| Center Cutting Capability | Yes |
| Connection Diameter Machine Side (Metric) | 6 |
| Theoretical Cutting Edge Length (Metric) | 3 |
| Runout Axial (Metric) | 0.01 |
| Runout Radial (Metric) | 0.01 |
| Neck Length 1 (Metric) | 6 |
| Corner Chamfer Width Upper Tolerance (Metric) | 0.05 |
| Lower Cutting Diameter Tolerance (Metric) | -0.04 |
| Upper Cutting Diameter Tolerance (Metric) | -0.02 |
| Rake Angle Radial | -12 degrees |
| Tool Cutting Edge Angle | 90 degrees |
| Tool Cutting Edge Angle In Feed Direction End | 92 degrees |
| Tool Cutting Edge Angle In Feed Direction Side | 90 degrees |
| Collosion Angle | 9 degrees |
| Peripheral Edges In The Tool | 3 |
| Face Cutting Edge Count | 3 |
| Pheripheral Cutting Edge Count | 3 |
| Cutting Geometry Type | JHP170 |
| Cutting Geometry Type Technical | JHP170 |
| Base Item Number | JHP170-High Performance-Square-Hardened Stee,M |
| Max. Depth Of Cut | 3 mm |
| Max. Depth Of Cut In Feed Direction End (Metric) | 0.6 |
| Max. Depth Of Cut In Feed Direction Side (Metric) | 3 |
| Max. Helical Interpolation Hole Diameter (Metric) | 5.83 |
| Maximum Ramping Angle | 1 degrees |
| Min. Clamping Length (Metric) | 36 |
| Min. Helical Interpolation Hole Diameter (Metric) | 3.9 |
| Product Type | Industrial Supplies |
| Unit of Measure | Metric |
| Weight | 0.035 |