Seco Tools
2575294
LNKT050404PPN4-E05
Specifications
| Material | Carbide |
|---|---|
| Corner Radius (Metric) | 0.4 |
| Corner Radius (Inch) | 0.02 |
| Coating/Finish | Uncoated |
| Thickness (Metric) | 4.7 |
| Thickness (Inch) | 0.19 |
| Short Description | Disc Milling Insert |
| Long Description | Seco LNKT050404PPN4-E05 Disc Milling Insert 335.18 Insert |
| Unit Of Measure | Metric |
| Series | 335.18 |
| Grade | H25 |
| Chip Breaker Type | E05 |
| Length (Decimal) | 0.39 |
| ANSI Code | LNKT050404PPN4-E05 |
| Wiper Edge Length (Decimal) | 0.05 |
| Wiper Edge Length (Metric) | 1.3 |
| Rake Angle | 23 degrees |
| Number of Cutting Edges | 4 |
| Cutting Edge Effective Length (Metric) | 5 |
| Cutting Edge Effective Length (Decimal) | 0.2 |
| Applicable Material | Tough-Non-Ferrous Materials |
| Direction Of Hand | Neutral |
| Cutting Geometry Type | E05 |
| Base Item Number | 335.18 - Width of Cut 8-20mm (.315-.750 inch),Both |
| Length | 10 mm |
| Product Type | Industrial Supplies |
| Unit of Measure | Metric |
| Weight | 0.007 LB |