Seco Tools
29372
28120
Specifications
| Type | Square |
|---|---|
| Shank Type | Cylindrical |
| Length Of Cut (Metric) | 25 |
| Overall Length (Metric) | 75 |
| Number Of Flutes | 1 |
| Material | Solid Carbide |
| Coating/Finish | Uncoated |
| Unit Of Measure | Metric |
| Peripheral Effective Cutting Edge Count | 1 |
| Flute Helix Angle | 38 degrees |
| Rake Angle Axial | 38 degrees |
| Short Description | Solid Milling |
| Cutting Diameter | 12 mm |
| Shank Diameter | 12 mm |
| Coolant Through | No |
| Long Description | Seco 28120 Solid Milling G. P. for Plastic Square End Mill |
| Series | JABRO |
| ANSI Code | 28120 |
| Applicable Materials | Plastic |
| Direction Of Hand | Right |
| Direction of Flute | Right |
| Cutting Edge Count | 1 |
| Center Cutting Capability | Yes |
| Connection Diameter Machine Side (Metric) | 12 |
| Theoretical Cutting Edge Length (Metric) | 25 |
| Lower Cutting Diameter Tolerance (Metric) | -0.04 |
| Upper Cutting Diameter Tolerance (Metric) | -0.02 |
| Rake Angle Radial | 18 degrees |
| Tool Cutting Edge Angle | 90 degrees |
| Tool Cutting Edge Angle In Feed Direction End | 91.5 degrees |
| Tool Cutting Edge Angle In Feed Direction Side | 90 degrees |
| Peripheral Edges In The Tool | 1 |
| Face Cutting Edge Count | 1 |
| Pheripheral Cutting Edge Count | 1 |
| Cutting Geometry Type | J28 |
| Cutting Geometry Type Technical | J28 |
| Base Item Number | J28-General Purpose-Square-Plastic-1 Flute,M |
| Max. Depth Of Cut | 25 mm |
| Max. Depth Of Cut In Feed Direction End (Metric) | 2.4 |
| Max. Depth Of Cut In Feed Direction Side (Metric) | 25 |
| Max. Helical Interpolation Hole Diameter (Metric) | 23.4 |
| Maximum Ramping Angle | 45 degrees |
| Min. Clamping Length (Metric) | 45 |
| Min. Helical Interpolation Hole Diameter (Metric) | 15.6 |
| Product Type | Industrial Supplies |
| Unit of Measure | Metric |
| Weight | 0.21 LB |