Seco Tools
3215529
JME642008G3R008.0Z2-DIA
Specifications
| Length Of Cut (Inch) | 1.2 |
|---|---|
| Helix Angle | 30 degrees |
| Material | Solid Carbide |
| Shank Diameter (Metric) | 4 |
| Cutting Diameter (Metric) | 0.8 |
| Overall Length (Metric) | 60 |
| Coating/Finish | Diamond |
| Corner Radius (Metric) | 0.08 |
| Number Of Flutes | 2 |
| Unit Of Measure | Metric |
| Peripheral Effective Cutting Edge Count | 2 |
| Rake Angle Axial | 30 degrees |
| Short Description | Solid Milling |
| Shank Type | Cylindrical |
| Series | JABRO |
| Long Description | Seco JME642008G3R008.0Z2-DIA Solid Milling Dia Coat - Graphite Corner Rad End Mill |
| Direction Of Hand | Right |
| Coolant Through | No |
| Neck Length (Metric) | 4 |
| ANSI Code | JME642008G3R008.0Z2-DIA |
| Applicable Materials | Graphite |
| Direction of Flute | Right |
| Cutting Edge Count | 2 |
| Center Cutting Capability | Yes |
| Connection Diameter Machine Side (Metric) | 4 |
| Theoretical Cutting Edge Length (Metric) | 1.2 |
| Runout Axial (Metric) | 0.01 |
| Runout Radial (Metric) | 0.01 |
| Neck Length 1 (Metric) | 4 |
| Lower Cutting Diameter Tolerance (Metric) | 0.02 |
| Rake Angle Radial | 10 degrees |
| Tool Cutting Edge Angle | 90 degrees |
| Tool Cutting Edge Angle In Feed Direction End | 90 degrees |
| Tool Cutting Edge Angle In Feed Direction Side | 90 degrees |
| Collosion Angle | 9.31 degrees |
| Peripheral Edges In The Tool | 2 |
| Face Cutting Edge Count | 2 |
| Pheripheral Cutting Edge Count | 2 |
| Cutting Geometry Type | JME642 |
| Cutting Geometry Type Technical | JME642 |
| Base Item Number | JME642-Miniature-Square-Graphite-Diamond c,M |
| Max. Depth Of Cut | 1.20 mm |
| Max. Depth Of Cut In Feed Direction End (Metric) | 0.16 |
| Max. Depth Of Cut In Feed Direction Side (Metric) | 1.2 |
| Max. Helical Interpolation Hole Diameter (Metric) | 1.5 |
| Max. Working Depth 0.5 Degree (Metric) | 4.57 |
| Max. Working Depth 0 Degree (Metric) | 4.33 |
| Max. Working Depth 1.5 Degree (Metric) | 4.89 |
| Max. Working Depth 1 Degree (Metric) | 4.74 |
| Max. Working Depth 2 Degrees (Metric) | 5.02 |
| Max. Working Depth 3 Degrees (Metric) | 5.25 |
| Maximum Ramping Angle | 0.5 degrees |
| Min. Clamping Length (Metric) | 28 |
| Min. Helical Interpolation Hole Diameter (Metric) | 1.04 |
| Product Type | Industrial Supplies |
| Unit of Measure | Metric |
| Weight | 0.022 |