Seco Tools
74080705
MM06-0.236-45.15-E02
Specifications
| Material | Carbide |
|---|---|
| Corner Radius (Metric) | 0.2 |
| Corner Radius (Inch) | 0.01 |
| Coating/Finish | Coated |
| Type | Exchangeable, Center Drill/Chamfer |
| Short Description | Exchangeable Head Mill Insert |
| Unit Of Measure | Metric |
| Series | Minimaster |
| Grade | T60M |
| Chip Breaker Type | E02 |
| ANSI Code | MM06-0.236-45.15-E02 |
| Number of Cutting Edges | 1 |
| Corner Chamfer Width (Decimal) | 0.08 |
| Corner Chamfer Width (Metric) | 2.1 |
| Cutting Diameter | 1.80 mm |
| Cutting Diameter (Decimal) | 0.07 |
| Number of Peripheral Edges | 2 |
| Number of Cutting Edges (Peripheral Effective) | 2 |
| Cutting Edge Effective Length (Metric) | 4 |
| Cutting Edge Effective Length (Decimal) | 0.16 |
| Functional Length (Metric) | 5.1 |
| Functional Length (Decimal) | 0.2 |
| Point Length (Metric) | 2.1 |
| Point Length (Decimal) | 0.08 |
| Torque | 4 Nm |
| Applicable Material | Optimized-All Materials |
| Tool Cutting Edge Angle | 45 degrees |
| Tool Cutting Edge Angle In Feed Direction End | 90 degrees |
| Tool Cutting Edge Angle In Feed Direction Side | 45 degrees |
| Rake Angle Axial | 8 deg |
| Rake Angle Radial | 6 degrees |
| Corner Chamfer Angle | 45 degrees |
| Base Item Number | Chamfering,Both |
| Max. Cutting Diameter (Decimal) | 0.24 |
| Max. Cutting Diameter (Metric) | 6 |
| Max. Depth Of Cut | 2.10 mm |
| Max. Depth Of Cut (Decimal) | 0.08 |
| Max. Depth Of Cut In Feed Direction Side (Decimal) | 0.08 |
| Max. Depth Of Cut In Feed Direction Side (Metric) | 2.1 |
| Maximum Depth Of Cut (Inch) | 0.08 |
| Product Type | Industrial Supplies |
| Unit of Measure | Metric |
| Weight | 0.004 LB |