Tungaloy
TUN6737014
DCGT 32.5V FR-J10 SH725
Specifications
| Material | Carbide |
|---|---|
| Corner Radius (Inch) | 0.01 |
| Style | DCGT |
| Thickness (Inch) | 0.156 |
| Grade | SH725 |
| Unit Of Measure | Imperial |
| Cutting Edge Length (Decimal) | 0.46 |
| Clearance Angle Major | 7 degrees |
| Country of Origin | Japan |
| Chip Breaker Type | J10 |
| Fixing Hole Diameter (Decimal) | 0.18 |
| Cutting Direction | Right |
| Applicable Material | Steel, Stainless Steel, Cast Iron, Hi Temp Alloys |
| Depth of Cut Maximum (Decimal) | 0.2 |
| Inscribed Circle Diameter (Fractional) | 3/8 |
| Base Item Number | TUN6737014 |
| Max. Turning Feed | 0.0039 Inch/rev |
| Min D.O.C. (Decimal) | 0.0004 |
| Min. Turning Feed | 0.0004 Inch/rev |
| Product Type | Industrial Supplies |
| Unit of Measure | Imperial |
| Body Material | Carbide |
| Measurement Type | Inch |