YG-1
D9463
5/16 x 24, H3 3FL FAST SP FL TAP BOTTOM HARDSLICK COATED
Specifications
| Thread Limit | H3 |
|---|---|
| Number Of Flutes | 3 |
| Diameter (Inch) | 0.32 |
| Diameter (Metric) | 7.94 |
| Type | General Purpose |
| Depth Of Cut (Inch) | 2.50 x D |
| Overall Length (Inch) | 2.72 |
| Coating/Finish | Hardslick |
| Thread Size | 5/16 |
| Overall Length (Metric) | 69.09 |
| Thread Standard | UNF |
| Short Description | 3FL FAST SP FL TAP BOTTOM HARDSLICK COATED |
| Chamfer | Bottoming |
| Thread Pitch | 24 |
| Thread Length (Decimal) | 1.13 |
| Thread Length (Metric) | 28.7 |
| Helix Angle | 45 degrees |
| Shank Diameter (Metric) | 8.08 |
| Shank Diameter (Decimal) | 0.32 |
| Unit Of Measure | Imperial |
| Overall Length | 2.72 Inch |
| Cutting Direction | Right |
| Shank Type | Square |
| Tap Type | SPFL |
| Square Length (Decimal) | 0.38 |
| Square Length (Metric) | 9.65 |
| Blank Standard | 302 |
| Chamfer Length | 1.5P-2P |
| Connection (Decimal) | 0.32 x 0.24 |
| Connection (Metric) | 8.08 x 6.05 |
| Drill Size (Decimal) | 0.28 |
| Drill Size (Metric) | 6.98 |
| Square Size (Decimal) | 0.24 |
| Square Size 2 (Decimal) | 0.38 |
| Square Size (Metric) | 6.05 |
| Square Size 2 (Metric) | 9.65 |
| Through Coolant | No |
| Useable Length (Decimal) | 1.13 |
| Useable Length (Metric) | 28.7 |
| Base Item Number | D9463 |
| Chamfer Type | Bottoming |
| Product Type | Industrial Supplies |
| Unit of Measure | Imperial |
| Weight | 0.052 |
| Thread Length (mm) | 28.7 |
| Overall Length (Decimal Inch) | 2.72 |
| Trade Name | YG Tap GP |
| Size | 5/16 |
| Square Size (Decimal Inch) | 0.238 |
| Finish | Hardslick |