YG-1
E0164
#4-40 3 FL SP FL MODI BOTTOM HARD STEEL HARDSLICK COATED
Specifications
| Thread Limit | H4 |
|---|---|
| Number Of Flutes | 3 |
| Diameter (Inch) | 0.12 |
| Diameter (Metric) | 2.84 |
| Depth Of Cut (Inch) | 2.50 x D |
| Overall Length (Inch) | 1.88 |
| Coating/Finish | Hardslick |
| Thread Size | #4 |
| Overall Length (Metric) | 47.8 |
| Thread Standard | UNC |
| Short Description | 3 FL SP FL MODI BOTTOM HARD STEEL HARDSLICK COATED |
| Chamfer | Modified Bottoming |
| Thread Pitch | 40 |
| Thread Length (Decimal) | 0.24 |
| Thread Length (Metric) | 6 |
| Shank Diameter (Metric) | 3.6 |
| Shank Diameter (Decimal) | 0.15 |
| Unit Of Measure | Imperial |
| Overall Length | 1.88 Inch |
| Cutting Direction | Right |
| Shank Type | Square |
| Tap Type | SPFL |
| Square Length (Decimal) | 0.19 |
| Square Length (Metric) | 4.8 |
| Workpiece Material | Steel |
| Blank Standard | 302A |
| Chamfer Length | 2P-3P |
| Connection (Decimal) | 0.15 x 0.11 |
| Connection (Metric) | 3.58 x 2.79 |
| Drill Size (Decimal) | 0.09 |
| Drill Size (Metric) | 2.27 |
| Neck Diameter (Decimal) | 0.10 |
| Neck Diameter (Metric) | 2 |
| Square Size (Decimal) | 0.11 |
| Square Size 2 (Decimal) | 0.19 |
| Square Size (Metric) | 3.6 |
| Square Size 2 (Metric) | 4.8 |
| Useable Length (Decimal) | 0.57 |
| Useable Length (Metric) | 14.3 |
| Base Item Number | E0164 |
| Chamfer Type | Modified Bottoming |
| Neck Diameter (Inch) | 0.1 |
| Product Type | Industrial Supplies |
| Shank Diameter (Inch) | 0.141 |
| Unit of Measure | Imperial |
| Weight | 0.010 |
| Thread Length (mm) | 6 |
| Overall Length (Decimal Inch) | 1.88 |
| Trade Name | YG Tap Steel |
| Size | #4 |
| Square Size (Decimal Inch) | 0.11 |
| Finish | Hardslick |