YG-1
E0625
9/16-18 4 FL SP FL MODI BOTTOM HARD STEEL HARDSLICK COATED
Specifications
| Thread Limit | H5 |
|---|---|
| Number Of Flutes | 4 |
| Diameter (Inch) | 0.57 |
| Diameter (Metric) | 14.29 |
| Depth Of Cut (Inch) | 2.50 x D |
| Overall Length (Inch) | 3.59 |
| Coating/Finish | Hardslick |
| Thread Size | 9/16 |
| Overall Length (Metric) | 91.2 |
| Thread Standard | UNF |
| Short Description | 4 FL SP FL MODI BOTTOM HARD STEEL HARDSLICK COATED |
| Chamfer | Modified Bottoming |
| Thread Pitch | 18 |
| Thread Length (Decimal) | 0.52 |
| Thread Length (Metric) | 13 |
| Shank Diameter (Metric) | 10.9 |
| Shank Diameter (Decimal) | 0.43 |
| Unit Of Measure | Imperial |
| Overall Length | 3.59 Inch |
| Cutting Direction | Right |
| Shank Type | Square |
| Tap Type | SPFL |
| Square Length (Decimal) | 0.5 |
| Square Length (Metric) | 12.7 |
| Workpiece Material | Steel |
| Blank Standard | 302A |
| Chamfer Length | 2P-3P |
| Connection (Decimal) | 0.43 x 0.33 |
| Connection (Metric) | 10.90 x 8.18 |
| Drill Size (Decimal) | 0.52 |
| Drill Size (Metric) | 13 |
| Neck Diameter (Decimal) | 0.40 |
| Neck Diameter (Metric) | 10.6 |
| Square Size (Decimal) | 0.33 |
| Square Size 2 (Decimal) | 0.5 |
| Square Size (Metric) | 10.9 |
| Square Size 2 (Metric) | 12.7 |
| Useable Length (Decimal) | 2.07 |
| Useable Length (Metric) | 52.5 |
| Base Item Number | E0625 |
| Chamfer Type | Modified Bottoming |
| Neck Diameter (Inch) | 0.4 |
| Product Type | Industrial Supplies |
| Shank Diameter (Inch) | 0.429 |
| Unit of Measure | Imperial |
| Weight | 0.129 |
| Thread Length (mm) | 13 |
| Overall Length (Decimal Inch) | 3.59 |
| Trade Name | YG Tap Steel |
| Size | 9/16 |
| Square Size (Decimal Inch) | 0.322 |
| Finish | Hardslick |