YG-1
E0703
3/4-10 4 FL SP FL MODI BOTTOM HARD STEEL HARDSLICK COATED
Specifications
| Thread Limit | H3 |
|---|---|
| Number Of Flutes | 4 |
| Diameter (Inch) | 0.75 |
| Diameter (Metric) | 19.05 |
| Depth Of Cut (Inch) | 2.50 x D |
| Overall Length (Inch) | 4.25 |
| Coating/Finish | Hardslick |
| Thread Size | 3/4 |
| Overall Length (Metric) | 108 |
| Thread Standard | UNC |
| Short Description | 4 FL SP FL MODI BOTTOM HARD STEEL HARDSLICK COATED |
| Chamfer | Modified Bottoming |
| Thread Pitch | 10 |
| Thread Length (Decimal) | 0.83 |
| Thread Length (Metric) | 21 |
| Shank Diameter (Metric) | 150 |
| Shank Diameter (Decimal) | 0.59 |
| Unit Of Measure | Imperial |
| Overall Length | 4.25 Inch |
| Cutting Direction | Right |
| Shank Type | Square |
| Tap Type | SPFL |
| Square Length (Decimal) | 0.69 |
| Square Length (Metric) | 17.5 |
| Workpiece Material | Steel |
| Blank Standard | 302A |
| Chamfer Length | 2P-3P |
| Connection (Decimal) | 0.59 x 0.45 |
| Connection (Metric) | 14.99 x 11.23 |
| Drill Size (Decimal) | 0.66 |
| Drill Size (Metric) | 16.74 |
| Neck Diameter (Decimal) | 0.60 |
| Neck Diameter (Metric) | 14.7 |
| Square Size (Decimal) | 0.45 |
| Square Size 2 (Decimal) | 0.69 |
| Square Size (Metric) | 15 |
| Square Size 2 (Metric) | 17.5 |
| Useable Length (Decimal) | 2.48 |
| Useable Length (Metric) | 62.99 |
| Base Item Number | E0703 |
| Chamfer Type | Modified Bottoming |
| Neck Diameter (Inch) | 0.6 |
| Product Type | Industrial Supplies |
| Unit of Measure | Imperial |
| Weight | 0.287 |
| Thread Length (mm) | 21 |
| Overall Length (Decimal Inch) | 4.25 |
| Trade Name | YG Tap Steel |
| Size | 3/4 |
| Square Size (Decimal Inch) | 0.442 |
| Finish | Hardslick |