YG-1
F6162
4 X 40, H2 2FL SP FL M7 BOTTOM GP TAP HARDSLICK COATED
Specifications
| Thread Limit | H2 |
|---|---|
| Number Of Flutes | 2 |
| Diameter (Inch) | 0.12 |
| Diameter (Metric) | 2.84 |
| Type | General Purpose |
| Depth Of Cut (Inch) | 2.50 x D |
| Overall Length (Inch) | 1.88 |
| Coating/Finish | Hardslick |
| Thread Size | #4 |
| Overall Length (Metric) | 47.75 |
| Thread Standard | UNC |
| Short Description | 2FL SP FL M7 BOTTOM GP TAP HARDSLICK COATED |
| Chamfer | Bottoming |
| Thread Pitch | 40 |
| Thread Length (Decimal) | 0.24 |
| Thread Length (Metric) | 5.99 |
| Helix Angle | 50 degrees |
| Shank Diameter (Metric) | 3.58 |
| Shank Diameter (Decimal) | 0.15 |
| Unit Of Measure | Imperial |
| Overall Length | 1.88 Inch |
| Cutting Direction | Right |
| Shank Type | Square |
| Tap Type | SPFL |
| Square Length (Decimal) | 0.19 |
| Square Length (Metric) | 4.83 |
| Blank Standard | 302A |
| Chamfer Length | 1.5P-2P |
| Connection (Decimal) | 0.15 x 0.11 |
| Connection (Metric) | 3.58 x 2.79 |
| Drill Size (Decimal) | 0.09 |
| Drill Size (Metric) | 2.27 |
| Neck Diameter (Decimal) | 0.08 |
| Neck Diameter (Metric) | 1.96 |
| Square Size (Decimal) | 0.11 |
| Square Size 2 (Decimal) | 0.19 |
| Square Size (Metric) | 2.79 |
| Square Size 2 (Metric) | 4.83 |
| Through Coolant | No |
| Useable Length (Decimal) | 0.57 |
| Useable Length (Metric) | 14.3 |
| Base Item Number | F6162 |
| Chamfer Type | Bottoming |
| Neck Diameter (Inch) | 0.08 |
| Product Type | Industrial Supplies |
| Unit of Measure | Imperial |
| Weight | 0.010 |
| Thread Length (mm) | 5.99 |
| Overall Length (Decimal Inch) | 1.88 |
| Trade Name | YG Tap GP |
| Size | #4 |
| Square Size (Decimal Inch) | 0.11 |
| Finish | Hardslick |