YG-1
H8424
1/4-28, H4 3FL SP FL PM TAP FOR UPTO 45Rc HARDSLICK
Specifications
| Thread Limit | H4 |
|---|---|
| Number Of Flutes | 3 |
| Diameter (Inch) | 0.25 |
| Diameter (Metric) | 6.35 |
| Depth Of Cut (Inch) | 2.50 x D |
| Overall Length (Inch) | 2.5 |
| Coating/Finish | Hardslick |
| Thread Size | 1/4 |
| Overall Length (Metric) | 63.5 |
| Thread Standard | UNF |
| Short Description | 3FL SP FL PM TAP FOR UPTO 45Rc HARDSLICK |
| Chamfer | Modified Bottoming |
| Thread Pitch | 28 |
| Thread Length (Decimal) | 0.36 |
| Thread Length (Metric) | 8.99 |
| Helix Angle | 15 degrees |
| Shank Diameter (Metric) | 6.48 |
| Shank Diameter (Decimal) | 0.26 |
| Unit Of Measure | Imperial |
| Overall Length | 2.50 Inch |
| Cutting Direction | Right |
| Shank Type | Square |
| Tap Type | SPFL |
| Square Length (Decimal) | 0.31 |
| Square Length (Metric) | 7.87 |
| Workpiece Material | Hard Steel |
| Blank Standard | 302A |
| Chamfer Length | 2P-3P |
| Connection (Decimal) | 0.26 x 0.20 |
| Connection (Metric) | 6.48 x 4.85 |
| Drill Size (Decimal) | 0.22 |
| Drill Size (Metric) | 5.53 |
| Neck Diameter (Decimal) | 0.20 |
| Neck Diameter (Metric) | 5.08 |
| Square Size (Decimal) | 0.2 |
| Square Size 2 (Decimal) | 0.31 |
| Square Size (Metric) | 7.87 |
| Through Coolant | No |
| Useable Length (Decimal) | 1 |
| Useable Length (Metric) | 25.4 |
| Base Item Number | H8424 |
| Chamfer Type | Modified Bottoming |
| Neck Diameter (Inch) | 0.2 |
| Product Type | Industrial Supplies |
| Unit of Measure | Imperial |
| Weight | 0.031 |
| Thread Length (mm) | 8.99 |
| Overall Length (Decimal Inch) | 2.5 |
| Trade Name | YG Tap Hard Steel |
| Size | 1/4 |
| Square Size (Decimal Inch) | 0.191 |
| Finish | Hardslick |