YG-1
TR808445HAR
M10 - 1.0 D5 HSS-PM 3FL SP PT PLUG HARDSLICK COATED STEELS UP TO 45HRC TAP
Specifications
| Depth Of Cut (Inch) | 3 x D |
|---|---|
| Diameter (Metric) | 10 |
| Coating/Finish | Hardslick |
| Overall Length (Metric) | 74.68 |
| Number Of Flutes | 3 |
| Diameter (Inch) | 0.4 |
| Thread Size | M10 |
| Overall Length (Inch) | 2.94 |
| Material | HSS |
| Short Description | HSS-PM 3FL SP PT PLUG HARDSLICK COATED STEELS UP TO 45HRC TAP |
| Thread Standard | MF |
| Chamfer | Plug |
| Thread Length (Decimal) | 0.75 |
| Thread Length (Metric) | 19 |
| Unit Of Measure | Imperial |
| Overall Length | 2.94 Inch |
| Cutting Direction | Right |
| Thread Limit | D5 |
| Shank Type | Square |
| Thread Pitch | 1 |
| Square Size (Decimal Inch) | 0.286 |
| Tap Type | SPPT |
| Helix Angle | 0 |
| Chamfer Type | Plug |
| Square Length (Decimal) | 0.44 |
| Square Length (Metric) | 11.18 |
| Square Size (Decimal) | 0.29 |
| Square Size (Metric) | 11.18 |
| Workpiece Material | Hard Steel |
| Blank Standard | 302A |
| Chamfer Length | 4P-5P |
| Connection (Decimal) | 0.39 x 0.29 |
| Connection (Metric) | 9.68 x 7.26 |
| Drill Size (Decimal) | 0.36 |
| Drill Size (Metric) | 9.09 |
| Neck Diameter (Decimal) | 0.31 |
| Neck Diameter (Metric) | 7.87 |
| Shank Diameter (Decimal) | 0.39 |
| Shank Diameter (Metric) | 9.68 |
| Square Size 2 (Decimal) | 0.44 |
| Through Coolant | No |
| Useable Length (Decimal) | 1.26 |
| Useable Length (Metric) | 31.8 |
| Base Item Number | TR808445HAR |
| Neck Diameter (Inch) | 0.31 |
| Product Type | Industrial Supplies |
| Unit of Measure | Imperial |
| Weight | 0.088 |
| Thread Length (mm) | 19 |
| Overall Length (Decimal Inch) | 2.94 |
| Trade Name | YG Tap Hard Steel |
| Size | M10 |
| Finish | Hardslick |